Optical Mirror

 The reflector, as the name suggests, was born to meet people's requirements for light reflection. It is an optical element that uses the law of light reflection. Optical mirrors generally include spherical mirrors/reflectors, flat mirrors, and aspheric mirrors. But basically, it is through optical coating or direct selection of metal materials.

 

Ecoptik (also known as BRD Optical) is one of the leading optical mirrors factory which provides custom optical mirrors, and our coated optical mirrors for sale mainly include metal (aluminum, silver, gold) coatings and dielectric coatings. It is widely used in laser systems, scanning systems, and optical measurement systems. Ecoptik (also known as BRD Optical) can provide various optical mirrors and custom optical mirrors, such as scanning mirror, AI mirror, au mirror, front surface mirror and dielectric mirror. Contact Ecoptik (also known as BRD Optical) to get more about the information, meaning, and concept of custom optical mirrors.

 

Custom Optical Mirror FAQs

 

 

What Are The Main Reflective Films?What Are The Main Reflective Films?

There are mainly metal materials (Au, Ag, Al) and dielectric materials. There are also some filter materials

 

How To Avoid The Influence Of The Flatness Of Lens.How To Avoid The Influence Of The Flatness Of Lens.

There are some mirrors used by lasers, which have high requirements for the surface flatness. There will indeed be a problem of changes in the back of the coating, but as one of the leading optical mirror manufacturers, we will design in advance based on practical experience to avoid this problem as much as possible.


评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate and a polarizer
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and single wavelength.   Standard
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is also widely used in v
阅读全文