Narrow Bandpass Filter

Based on the technique of all-dielectric hard coating and the principle of dielectric interference, and based on the characteristics of narrow-band optical pass filters, the optical properties are independent of the substrate. The narrow band bandpass filter produced by Ecoptik (also known as BRD Optical) is more convenient to be built into the instrument imaging system so that its optical performance can be improved and effectively applied. The special optical material substrate is used to solve the problem that the absorption type synthetic glass is easy to mold and the optical performance is unstable. The narrow-band optical pass filters are produced according to the customer's index requirements.

Description Of Narrow Band Optical Filter

 

Bandwidth refers to the distance between two positions in the passband whose transmittance is half of the peak transmittanceThe above six parameters must be taken into account in the use and selection of narrow-band filters. Different performance indexes require different manufacturing costs of filters.

 Specifications Of Narrow Band Pass Filter

 

Material

Optical glass BK7/ Fused silica

Surface quality

40/20, 20/10

Thickness range

0.5mm-5.0mm or upon the customer’s   request

FWHM

20nm, 30nm,40nm,50nm,60nm or upon   the customer’s request

Wavelength range

340nm, 380nm, 405nm, 450nm, 492nm   510nm,546nm,578nm, 600nm,620nm,630nm,650nm,850nm,805nm, 940nm, 1064nm

OD

OD3, OD4, OD5

Dimension

3mm-200mm

 

As one of the optical component manufacturers, we provide custom optical components, dome flange, optical bandpass filter design, optical mirror and etc.Want to know bandpass filter optik? Please contact us.



评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate and a polarizer
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and single wavelength.   Standard
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is also widely used in v
阅读全文