Meniscus Lens

 Ecoptik (also known as BRD Optical) provides meniscus lens in both positive and negative focal lengths. These meniscus lenses are useful when used with another lenses to increase or decrease the focal length. This meniscus lens element configuration does not introduce any additional coma or spherical aberrations

 

Description Of Positive&Negative Meniscus Lens

Ecoptik (also known as BRD Optical) provides meniscus lens in both positive and negative focal lengths. On the aspect of shape, it can be divided into convex meniscus lens and concave meniscus lens. On the aspect of the effect, it can be divided into diverging and converging meniscus lens.

 

Positive Meniscus Lens

A positive meniscus lens consists of two curved surfaces with similar radii of curvature and has a positive focal length. Positive meniscus lens are typically used for related applications such as reducing the focal length of another lens, increasing the numerical aperture, etc.In order to reduce spherical aberration, the beam should be incident on the convex surface of the lens when re-expanding or condensing or diverging collimated light is used; when it is used for converging light collimation, the beam should be incident on the concave surface.

 

Positive meniscus lenses are primarily used to minimize spherical aberration. When used in combination with another lens, a positive meniscus lens can reduce the focal length and increase the numerical aperture of the system without introducing significant spherical aberration. When used to converge parallel light, the convex surface of the lens should be oriented towards the direction of light emission in order to minimize spherical aberration. Coated lenses are also widely used in the visible and near-infrared fields.

 

Negative Meniscus Lens

A negative meniscus concave lens consists of two curved surfaces with similar radii of curvature and has a negative focal length.

 

Usually used to reduce the focal length of another lens, increase the numerical aperture and other related applications.

 

When used for focused beam collimation, the beam is incident on a concave surface. Negative meniscus lenses are mainly used to minimize spherical aberration.

 

Ecoptik is a professional optical components company, we provide custom optical components, precision optical products, brd optica, custom optical mirrors and etc. Want to know more? Please contact us.

 


评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate and a polarizer
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and single wavelength.   Standard
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is also widely used in v
阅读全文