Right Angle Prism

 Right Angle Prism

Right-angle prism mirrors are extremely versatile optical components, commonly used as individual prisms and components of optical assemblies. A beam of light entering the leg of a right-angle prism mirror will deviate by a nominal value of 90°, while precise rotation of the prism controls beam alignment. When light enters the hypotenuse of the prism, it is commonly called a Porro prism. In this configuration, a light beam will undergo 180° deviation that is invariant in the azimuthal axis, while precise adjustment of the prism controls beam elevation.

 

Description Of Right Angle Prism Mirror

A right angle prism mirror is usually used to turn a light path or deflect an image produced by an optical system by 90°.Depending on the orientation of the prism, the image can be aligned left and right, upside down and left and right.Rectangular prism can also be used for image combination, beam deviation and other applications.When a right angle optical mirror is used, some optical film is usually plated.The rectangular prism itself has a large contact area and such typical angles as 45° and 90°. Therefore, compared with ordinary reflectors, the rectangular prism is easier to install and has better stability and strength for mechanical stress.They are the best choice of optical parts for all kinds of devices and instruments.

 

Description Of Custom Right Angle Prism Mirror

Specifications Of Right Angle Prism Mirror

Material

BK7 glass / UV Fused silica

Dimension

3mm~200mm

Dimension tolerance

±0.1mm~±0.05mm

Surface quality

60/40, 40/20, 20/10

Surface flatness

λ/20 – λ/4

Angle tolerance

<30arc sec. ~5arc min

Bevel

<0.25mm×45°

Coating

As per customized request

 

TYPE No.

Dimension

RAP-5

5.0mm×5.0mm

RAP-10

10.0mm×10.0mm

RAP-12.5

12.5mm×12.5mm

RAP-15

15.0mm×15.0mm

RAP-20

20.0mm×20.0mm

RAP-25

25.0mm×25.0mm

RAP-50

50.0mm×50.0mm

 

Ecoptik (also known as BRD Optical) as one of the best optical components manufacturers was founded in 2004, and is located in the city of Changchun - the optic base of China with a beautiful view and profound optical culture.  Ecoptik Co., Ltd. (also known as BRD Optical Co. Ltd.) has state-of-the-art, modern technology machines for manufacturing and inspecting all kinds of precision optics. Our company occupies an area of 2,000 square meters, supported by 120 workers.

 

 


评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate and a polarizer
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and single wavelength.   Standard
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is also widely used in v
阅读全文