Rod Lens

 Rod Lens

Rod Lenses are polished on the circumference and ground on both ends. Optical performance is similar to a cylinder lens. Collimated light passing through thediameter of the rod lens will be focused into a line. Optical glass and UV Fused Silica substrates are available for a variety of UV, Visible, and NIR applications.


Description Of Rod Lens

The optical rod lens is primarily used to change the design requirements for imaging size. For example, converting a spot into a line spot, or changing the height of the image without changing the image width. Rod lenses can be applied to linear detector illumination, barcode scanning, holographic illumination, optical information processing, computer, laser emission. Also, a cylindrical lens is used in high-power laser systems and synchrotron beamlines. At the same time, the requirements for rod lens parts are becoming higher and higher, especially in the high-power laser cavity and long-distance line interferometers. Such as high-precision test instruments and devices. As a professional optical manufacturer, Ecoptik (also known as BRD Optical) has these types of equipment. The cross-sectional refractive index is parabolically shaped and has a self-focusing effect on the beam, which can be used on an optical lens collimated by the fiber.


Specifications Of Rod Lens

Material Fused Silica IR Trasmissive grade with OH< 10 PPM

1 Diameter 4.75mm+/-0.1mm

2 Length 12mm+/-0.2mm

3 Clear Aperture 4.75mm(14.922mm Naminal Circumference)*10mm Length

4 Surface Quality 20/10 Scratch/Dig

5 Surface Figure 1 wavelength irregularity

6 Bevel Edge 45Deg +/-15 deg Max Bevel=0.5mm

7 Coating MgF2 Hard Coating Centered at 780nm

8 AOI 22DegEcoptik (also known as BRD Optical) as one of the best optical components manufacturers was founded in 2004, and is located in the city of Changchun - the optic base of China with a beautiful view and profound optical culture. Ecoptik Co., Ltd. (also known as BRD Optical Co. Ltd.) has state-of-the-art, modern technology machines for manufacturing and inspecting all kinds of precision optics. Our company occupies an area of 2,000 square meters, supported by 120 workers.

 


评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate and a polarizer
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and single wavelength.   Standard
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is also widely used in v
阅读全文