Front Surface Mirror

 Front Surface Mirror

Ecoptik designs and manufactures custom optical mirrors with high reflectance, which can double the output power of the laser; it is reflected by the first reflecting surface, the reflected image is not distorted, and there is no ghosting.

 

Description Of Front Surface Mirror

 

The Ecoptik mirror with high reflectance can double the output power of the laser; it is reflected by the first reflecting surface, the reflected image is not distorted, and there is no ghosting, which is the reflection of the front surface. If a common optical mirror is used as the second reflecting surface, not only the reflectance is low, but also the wavelength is not selective, and ghosting is likely to occur. With the front coated film mirror, the obtained image is not only high in brightness, but also accurate and unbiased, the picture quality is clearer and the color is more realistic. Front coated mirrors are widely used for optical high fidelity scanning reflection imaging.

 

Specifications Of Front Silvered Mirror

Reflection   Rate

HR-94

R>94% @ 400~700nm

For Scanner, Copier, PTV, OHP, etc.

HR-97-#

R>97% @ SINGLE WANELENGT

For Scanner, PTV, LCD Projector. Etc.

HR-98-#

HR-780-A

R>97% @ IR wave length

For LBP(Laser Beam Printer) or other OAdigital Products

HR-780-B

 

Wavelength

Minimum reflectivity

   (nm)

   (%)

400

92

450

95.5

500

95.5

550

94.5

600

92.5

650

92

700

90

 

As a custom optic manufacturer, we will do our best to meet all the needs of customers.

 


评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate and a polarizer
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and single wavelength.   Standard
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is also widely used in v
阅读全文