Dashed Crosshairs

 Dashed Crosshairs

In most rifle scopes, the hood is the point of aim in your field of vision. Also known as "cross lines", these are glass etched, or most commonly made of wire.

 

Description Of Dashed Crosshairs

 

The collimator is produced by a non-amplifying optical device, such as a reflector sight (commonly known as a reflection sight), which provides the observer with a mask image superimposed on the field of view, and a blind collimator sight for both eyes. Produces a collimating mask using a refractive or reflective optical collimator to produce a collimating image of a illumination or reflection mask. These types of attractions are used in surveying/triangulation equipment to help celestial telescopes aim and serve as attractions for guns. Historically, they have been used in larger military weapon systems that could provide power to illuminate them, and operators needed a wide field of vision to visually track and locate moving targets (i.e., weapons from the laser/radar/computer era).

 

If you want to know more types of custom optics, please visit our website.

 

Ecoptik as one of the best precision optical products manufacturers was founded in 2004, and is located in the city of Changchun - the optic base of China with a beautiful view and profound optical culture. Brd optical co. ltd has state-of-the-art, modern technology machines for manufacturing and inspecting all kinds of precision optics. Our company occupies an area of 2,000 square meters, supported by 120 workers.

 


评论

发表评论

此博客中的热门博文

Quarter-wave plate

图片
  The 1/4 wave plate uses the anisotropic characteristics of the material to have different refractive indexes and propagation speeds for light in different polarization directions, resulting in a phase difference between the two components, and converting linearly polarized light into circularly polarized light, or converting circularly polarized light into linearly polarized light.   The 1/4 wave plate can realize the mutual conversion between linearly polarized light and circularly polarized light. Clever use of wave plates can also generate optical isolators, or simultaneously change the propagation direction and polarization direction of light.   The 1/4 wave plate can be applied to the laser. In the laser cavity, two quarter-wave plates placed on both sides of the gain medium can achieve single-frequency operation. A half-wave plate is placed between the laser crystal and the resonator mirror to reduce the depolarization loss. The combination of a half-wave plate an...
阅读全文

Polarization Beamsplitter Cube (PBS)

图片
  Polarizing Cube Beamsplitters  Introduction Polarization beamsplitter cube  split randomly polarized beams into two orthog-onal, linearly, polarized components-S-polarized ligh is reflected at a 90°.   Angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angleprism cemented together with a dielectric coating on the hypotenuse of one of prism.   The coatings have been designed to hold both the S-and P-polarization components to the same ratio of reflection-to-transmission over aspecific laser wavelength region.   This means that they will not change the state of polarization of the incident beam. The low polarization dependence of the metallic-dielec-tric coating allows the transmission and reflection for S-and P-polarization states to be within 6% of each other. All entrance and exit surfaces are coated with a high efficiency, narrowband, anti-reflection coating. We offer both broadband and s...
阅读全文

What is a Double Concave Lens?

图片
  1. Introduction to double concave lens A double concave lens is also called a negative spherical lens. The middle of the lens is thin, the edge is thick, and it is concave, so it is also called a concave lens, which has a divergent effect on light.   The imaging law of the concave lens is: when the object is a real object, it becomes an upright, reduced virtual image, and the image and the object are on the same side of the lens. The concave lens has a divergent effect on the light, so the lens is also called a divergent lens, a negative spherical lens.   2. Features of biconcave lens: A double concave lens is concave on both sides and has the same radius of curvature. A double concave lens with a negative focal length is usually used for beam collimation, increasing (decreasing) the focal length or enlarging (shrink) the image.   The double concave lens has a negative focal length and is often used in imaging or beam collimation applications. The coated lens is al...
阅读全文